Success Stories

I) A study on the saturation degree dependency of the seismic behavior of retaining walls

In this study, a finite difference code was employed to perform a series of equivalent linear analyses in order to investigate the effect of the degree of saturation on the response of the retaining structures. For this purpose, the required equations for the soil water retention function and the change of the soil shear modulus with the mean effective stress for both saturated and unsaturated zones were employed so as to the required hydro-mechanical coupling in unsaturated and saturated zone is directly introduced in the code. The results, indicate that in the unsaturated state, the increase in the effective stress, and hence, the shear modulus considerably affects the seismic forces on the retaining wall [1]. Shear modulus versus height in dry and unsaturated backfill conditions is presented in Figure 1. Soil water retention properties of soil no. 10700 and soil no. 18719 from SVSOILS™ were assigned to the backfill soil and the soil under foundation, respectively. Figure 2 depicts. Variation of resultant force applied on the wall during earthquake in dry and unsaturated backfill conditions.

Figure 1. Shear modulus versus height in dry and unsaturated backfill conditions (a. Wall=5m, b.Wall=6m)

Figure 2. Variation of resultant force applied on the wall during earthquake in dry and unsaturated backfill conditions. (a. Wall=5m, b. Wall=6m)

II) Application of AI-based methods in unsaturated soil mechanics

The progress in artificial intelligence methods has led to the development of new models for soil constitutive behavior. The unsaturated soil mechanics laboratory of Shiraz University has used such models in unsaturated soil mechanics for capturing the unsaturated soil hydraulic and mechanical properties. As an example Genetic Programming (GP) has been utilized for predicting Soil–Water Characteristic Curve (SWCC). In order to employ artificial intelligence methods, one has to have many data-points for the AI-based method to recognize and extract the required features. SVSOILS™ is one of the most complete databases of unsaturated hydraulic properties containing many soil types and several data-points thus providing a valuable database crucial for such research. Figure 3 compares performance of GP with the experimental data of a test case as well as those of a state-of-the-art model (Fredlund et al. 1997).

Figure 3. Average simulation results among tests used for validation (void ratio: 0.852; initial water content: 31.57%; clay content: 70.33%; silt content: 23.7%; dry density: 1457.7 kg/m3 ; specific gravity, Gs:2.7)

III) Application of pore network modeling (PNM) in unsaturated soil mechanics

The pore network modelling (PNM) is a powerful simulation technique which has been first introduced in petroleum engineering for modeling two phase flow, addressing problems in enhanced oil recovery. Since then, it has been used in many other disciplines from modeling porous structure of apple fruit (Ho et al. 2014) to gas diffusion layer of fuel cells (Hinebaugh and Bazylak 2010). A pore network model is used to portray the porous structure of a porous medium in form of a network consisting of pores and throats. In a natural or industrial porous medium, pores depict main void bodies of the soil, and throats specify the narrow void space connecting two adjacent pores (Figure 4). In unsaturated soil mechanics, pore networks can thus be used in order to model the hydraulic properties of unsaturated soils and any process happening inside the porous structure (e.g., transport of contaminates and colloids) (e.g., see Khaksar et al. 2013 and Rostami et al. 2013). Figure 5 presents the results of a pore network modeling of SWCC performed at unsaturated soil mechanics laboratory of Shiraz University (as compared with the classic SWCC equations and experimental data points).

Figure 4. A typical pore network model

Figure 5. The results of a pore network model as compared with experimental data and other available relationships (experimental data: soilvision soil No. 10974)

In conclusion, SVSOILS™ has provided us with a valuable database required for model development and research in various areas of unsaturated soils mechanics as expressed in this short success story. Our sincere gratitude is expressed to SOILVISION team for their continuous support. A list of the relevant references is provided, hereafter, for further details.

Some of the representative references

Fredlund, M. D., Fredlund, D. G., and Wilson, G. W. (1997). “Prediction of the soil-water characteristic curve from grain size distribution and volume-mass properties.” Proc., 3rd Brazilian Symp. on Unsaturated Soils, Rio de Janeiro, Brazil, 13–23.

Hinebaugh, J., & Bazylak, A. (2010). Condensation in PEM fuel cell gas diffusion layers: a pore network modeling approach. Journal of the Electrochemical Society, 157(10), B1382-B1390.

Ho, Q. T., Verboven, P., Fanta, S. W., Abera, M. K., Retta, M. A., Herremans, E., ... & Nicolaï, B. M. (2014). A multiphase pore scale network model of gas exchange in apple fruit. Food and bioprocess technology,7(2), 482-495.

Johari, A., Habibagahi, G., & Ghahramani, A. (2006). Prediction of soil–water characteristic curve using genetic programming. Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 132(5), 661-665.

Khaksar, H., Habibagahi, G., & Nikooee, E. (2013). SWRC modeling in unsaturated soils: A pore network approach. In Poromechanics V: Proceedings of the Fifth Biot Conference on Poromechanics (pp. 1570-1579).

Momeni, M. J., Habibagahi, G., & Nikooee, E. (2016). A study on the saturation degree dependency of the seismic behaviour of retaining walls. In E3S Web of Conferences (Proceedings of Unsat 2016) (Vol. 9, p.05001). EDP Sciences.

Rostami, A., Habibagahi, G., Ajdari, M., & Nikooee, E. (2013). Pore network investigation on hysteresis phenomena and influence of stress state on the SWRC. International Journal of Geomechanics, ASCE, 15(5), 04014072.

Testimonials

  • "I would like to thank you for all the support and the interest that I got from your team regarding this matter. I was able to successfully finish my project with the help of your technical support and managed to graduate achieving a high grade on the project I did. The software is extremely helpful and wasn't complicated and I look forward to future for more work and experience with your software. Thank you for your help and support."
  • "I have been using SoilVision's SVOFFICE™ software for research and training purposes for a number of years now. Myself and my colleagues have developed a number of training modules in this software, and have been using these to teach limit equilibrium and flow modeling to undergraduate students in the civil, environmental and mining engineering streams.

    In my opinion, this software is easy to learn and fun to use. The built-in tutorials are sufficient to get one started. With these tutorials, my students were generally able to complete their analyses with minimal involvement on my side.

    Based on my own experience, it takes around a month of full-time use to become reasonably competent with the software (provided that one understands the theoretical underpinnings of this type of analysis) - a short learning curve, compared to other products of similar complexity. The interface is intuitive enough for me to figure out things on my own, and I rarely had the need to ask for help.

    I don't generally like praising anything excessively, and I don't post particularly glowing reviews for anything. Having said that, I must mention the SoilVision support. At some point during my research, I was conducting a number of replication studies for my thesis. In that period, I must have emailed SoilVision's support anywhere from 2 to 5 times a day, with fairly complex (and sometimes very dumb) questions. I always got a response by the end of the day, and a resolution within a couple days at most. In a number of urgent cases (such as during a tutorial session with a classroom of students) I called them directly on the phone and, with senior product engineers involved, had the issue addressed in minutes."
  • "We have allowed our students the choice of using multiple Geotechnical software suites in our Dam Design and other Geotechnical courses. Our students consistently gravitate towards SoilVision software as being the most modern and user-friendly."

  • "I've been a geotechnical engineer for more than 25 years and SoilVision has the best tech support I have ever worked with. I truly appreciate their patience and help over the past year."

  • "Peter Brett Associates have been looking to update our existing slope stability software over the last year. After extensive research and trials, SVSLOPE® developed by SoilVision Systems Ltd. was found to meet all our existing and future design requirements. Its ease of use for modeling simple as well as complex geological and geometrical problems was a critical factor in our assessment as well as the incorporation of design to the Eurocodes. Their customer support has been faultless and their willingness to develop the software to meet our own specific design requirements is a most gratifying added bonus."

    "We love the fact that SVSLOPE® is part of an integrated suite of software and that, if required, 3D analysis can be undertaken. We would recommend this product to other geotechnical consulting firms."

  • "We have been using SVSLOPE® and SVFLUX™ for the past year and have found them to be efficient and productive engineering tools which have allowed us to offer our services in an efficient manner. The capability of automated increased discretization of the mesh is an absolute benefit to our modeling, reducing time and effort. We have found the software quick and easy for our engineers to train and utilize. I would recommend this product to other geotechnical consulting firms."

  • "The software is well documented and comes with number of useful example models. We were able to quickly begin creating models after a short review of the user interface and going through the available on-line webinars. The software offers solid benefits of less conservatism and the ability to model real geometry."

  • "This new software for stability analysis includes a number of state-of-the-art options for probabilistic slope stability analysis. This feature, combined with comprehensive deterministic analyses, will provide new opportunities to build confidence in the results of a site-specific analysis.”

  • "I'm excited to see the release of this new and innovative product. I look forward to and encourage the application of this software on additional geotechnical projects.”

  • "In consulting engineering practice, I am increasingly made aware of the important and beneficial role that modeling the unsaturated soil zone can play in providing the client with the best possible engineered solution. The SoilVision software has made it possible to readily estimate and incorporate unsaturated soil properties into the modeling of saturated / unsaturated soil systems.”

  • "The use of SVSLOPE® software as part of a research project on clay slopes under seismic conditions with the Université de Sherbrooke has been incredibly easy and effective. The continuation of this research with SoilVision is promising, with technical support, which was present at the right time, as well as a passionate geotechnical team supporting the project.”

Our industry defining software will change the game for your firm